Our Process
Surface-Specific Cleaning, Not One Method Everywhere
For the roof, the heavier moss was cleaned off carefully and the roof was treated afterward. Asphalt shingles are not a pressure washing surface, so the work had to respect the shingle granules, roof vents, and long eave lines instead of trying to make the roof look brand new in one pass.
The gutters were cleaned as part of the roof work. Around the exterior walls, the siding and soffits were soft washed to remove dirt and algae with a low-pressure rinse, especially below the overhangs where streaking showed in the photos. The patios were handled separately with pressure washing because concrete and hard flatwork can be cleaned more aggressively than siding or shingles.
The useful contractor detail on this job was the way each surface told a different story. The roof moss followed the long shingle rows, the siding streaks ran down from protected upper sections, and the patios had ground-level buildup. A single-method cleaning plan would have been faster to explain, but it would not have matched the building.
Results
A Cleaner Fourplex Exterior
The roof had moss and loose debris removed before treatment. The gutters were cleared so water could drain more reliably, the siding and soffits looked cleaner after soft washing, and the backyard patios received surface cleaning for the buildup that collects during wet seasons.
For a multi-unit property, this kind of combined exterior cleaning can be a practical way to improve appearance while staying ahead of roof, gutter, siding, and patio maintenance at the same time.